Connecticut Limited Heating Cooling Journeyperson (S-10) License
The Limited Heating Cooling Journeyperson (S-10) License holder is authorized to exclusively perform work that is limited to hot water or steam heating systems for:
- Buildings:
- Not over three stories high
- Steam pressure not exceeding fifteen pounds
- Cooling installations up to 35 tons per systems
- Total heating load not exceeding 500,000 BTU’s
- Servicing or installation of:
- LP gas
- Supplied by gas containers
- Oil burners
- Handling up to five gallons per hour
- Natural gas piping
- LP gas
The license holder can perform this work ONLY while employed by a licensed contractor.
How to Get the Limited Heating Cooling Journeyperson (S-10) License in Connecticut?
- Visit the CT Department of Consumer Protection (DCP) website to read the eligibility criteria, prerequisites, and documentation requirements for obtaining a Limited Heating Cooling Journeyperson (S-10) License. Follow the process for the Heating, Cooling and Sheet Metal Work, Hearth Product Work, Fuel Gas Work Licenses and the Heating, Cooling, Sheet Metal License Application Path - Journeyperson
- Meet the necessary education requirements requested by the DCP
- Required courses for high school graduation or GED test
- Apprenticeship certified by the CT DOL Apprentice Training Division
- Complete and submit the Office of Apprenticeship Training Completion Form before submitting an application for licensure
- Apply online, by visiting the State of Connecticut's eLicense website or send by mail the Occupational Trade Journeyperson License Application to the DCP official email address
This email address is being protected from spambots. You need JavaScript enabled to view it. with the following documents:- Copy of current CT Registered Apprenticeship Card
- Original copy of the Letter of Apprenticeship Completion issued by the DOL
- Criminal Conviction Worksheet, when requested
- For military service experience and training related to this application, contact the CT Department of Labor at (860) 263-6128 to request a recommendation
- Receipt for payment of the non-refundable application fee by check and/or money order to the "Treasurer, State of Connecticut"
- When applying for equivalent experience and training, including all documentation that demonstrates experience and training for this license type:
- Applicants holding "Out of State" License(s) shall provide:
Letters from current or previous employer(s)
- Letters must be on company letterhead, dated, and notarized
- Must include dates of employment and a specific, detailed description of your on-the job-training, work experience, and scope of work
- Letters that do not meet the criteria listed above will not be accepted
- W-2’s, 1099’s, or tax returns for proof of your on the job training or work experience won’t be accepted
Proof of related instruction that meet or exceed those indicated in the Limited Heating Cooling Journeyperson (S-10) equivalency chart
- Copies of transcripts
- Diplomas
- Certificates for proof of completion
- On the job training and work experiences CAN NOT be considered instead of the required classroom training
If out-of-state licenses are applicable, must include:
- Copies of all occupational trade licenses held in any state or jurisdiction
- Documentation including laws and regulations from that state or jurisdiction that reflect the requirements met to obtain these licenses
- Scope of work for these licenses
- Applicants holding "Out of State" License(s) shall provide:
- Schedule the Limited Heating Cooling Journeyperson (S-10) administered by PSI© in the desired location and time and pay the examination fee after receiving the DCP examination approval (the exam must be taken within one year from the date of approval):
- Take and pass the Limited Heating Cooling Journeyperson (S-10) exam
- If the exam is passed, submit the license fee along with the exam passing score results to obtain the official license
- Await the official Limited Heating Cooling Journeyperson (S-10) License issued by the Department of Consumer Protection
Connecticut Limited Heating Cooling Journeyperson (S-10) License Exam Prep Course
Connecticut Limited Heating Cooling Journeyperson (S-10) License Exam
Below is all the information related to the trade exam, including the official reference list.
Connecticut Limited Heating Cooling Journeyperson (S-10) Trade Exam
- Testing Method: Computer-based testing; semi-open book
- Testing Company: PSI©
- Number of Questions: 70
- Types of Questions: Multiple choice
- Time Allowed: 180 Minutes
- Minimum Passing Score: 70%
- Subjects Involved (No. of Questions):
- Insulation (2)
- Hangers and Supports (2)
- Sound, Vibration, and Seismic Control (1)
- Heating and Cooling Principles (3)
- Refrigerants and Refrigeration (5)
- Testing, Adjusting, and Balancing (3)
- Controls (5)
- A/C and Heat Pump Equipment (5)
- Furnaces and Heaters (5)
- Hydronics (4)
- Chimneys, Flues, and Vents (4)
- Combustion Air (2)
- Fuel Gas Systems (10)
- Ducts (6)
- Ventilation and Exhaust (3)
- Safety (4)
- Oil Burners (6)
- PSI© Limited Heating Cooling Journeyperson (S-10) Official Content Outline
Connecticut Limited Heating Cooling Journeyperson (S-10) Book Set
This set of books includes all required references for the Limited Heating Cooling Journeyperson (S-10) exam. Orders placed before 2 PM are shipped the same day via UPS and a tracking number is emailed before 3 PM.
CONNECTICUT LIMITED HEATING COOLING JOURNEYPERSON (S-10) - BOOK SET WITHOUT TABS INCLUDES ALL BOOKS FOR TRADE AND BUSINESS EXAMS
Sales price: $1,730.84-
CONNECTICUT LIMITED HEATING COOLING JOURNEYPERSON (S-10) - BOOK SET WITH TABS INCLUDES ALL BOOKS FOR TRADE AND BUSINESS EXAMS
Sales price: $1,830.84
Connecticut Limited Heating Cooling Journeyperson (S-10) Exam Books
Books Allowed in Testing
-
MJ8AE, an abridged version of Manual J, provi...Manual J Residential Load Calculation
r180 1$217.41$217.41 -
The International Residential Code uses thes...International Residential Code 2015
r173 1$192.66$192.66 -
Establishes minimum regulations for mechanica...International Mechanical Code 2015
r719 1$106.62$106.62 -
NFPA 31, Standard for the Installation of Oil...NFPA 31 Standard for the Installation of Oil-
r957 1$177.44$177.44 -
NFPA 54, National Fuel Gas Code provides indu...NFPA 54 National Fuel Gas Code or National Fu
r891 1$91.25$91.25 -
OSHA (CFR 29 Part 1926) is the leading safety...CFR (OSHA) Title 29 Part 1926 (1903 1904 1910
r84 1$30.00$30.00 -
This is a used book, used book pricing has be...Modern Refrigeration and Air Conditioning
r192 1$64.65$64.65 -
The Trane Ductulator is a tool used for duct ...Trane Ductulator
r299 1$30.00$30.00 -
The HVAC Duct Construction Standards is a SMA...HVAC Duct Construction Standards - Metal and
r163 1$241.38$241.38 -
Liquefied petroleum gas (LPG) storage, instal...NFPA 58 Liquid Petroleum Gas Code 2014
r1291 1$143.88$143.88
Books Not Allowed in Testing
-
The Pipefitter's Handbook is the primary refe...Pipefitters Handbook
r248 1$53.97$53.97 -
This book will help you learn how to use the ...Modern Hydronic Heating for Residential and L
r189 1$200.53$200.53 -
Residential Oil Burners, 3E provides the know...Residential Oil Burners
r262 1$181.05$181.05