Texas Wastewater Treatment Plant Operator Class C Contractor License

The Wastewater Treatment Plant Operator Class C Contractor License allows you to do the following work:

• Recommended minimum process control tests for small (1.0–5.0 MGD) wastewater treatment facilities
• Selection of appropriate operational data and use of various techniques of solids control to optimize the various treatment processes
• Control of wastewater discharges to the waters of the state
• Design criteria relative to minimum detention times in various wastewater treatment units and systems
• Effects of infiltration and inflow and industrial wastes on various collection and treatment processes
• General characteristics of wastewater and its effects on public health and the environment
• Geometric and algebraic math calculations related to wastewater flow, collection, pumping, and treatment
• Management theory and techniques as applied in the wastewater utility discipline
• Methods of thickening, dewatering, and stabilization of wastewater sludges
• Process control of various modes of wastewater treatment
• Proper procedures for collection and preservation of samples of treatment process for laboratory analysis
• Relative merits of various sludge treatment and disposal methods and equipment
• Requirements of the TCEQ’s system for waste discharge permits and self-reporting
• Safety practices for wastewater collection and treatment personnel
• Sampling and analysis requirements and procedures for sludges, biosolids, and soil samples
• Solution of both geometric and algebraic problems with extraneous data in problem statement in applications to wastewater flow, pumping, and treatment situations
• Wastewater:

  • Collection system facility components, materials of construction, construction practices, operation, and maintenance
  • Preliminary treatment facilities, operation, and maintenance
  • Pumps and motors, pumping installations, operation and maintenance
  • Monitoring, sampling, testing, analysis, instrumentation, equipment and techniques
• Characteristics of:

  • Chlorination and dechlorination processes and equipment, and alternative methods of disinfection
  • Digested biosolids, and methods of disposal or alternative use
  • Treated wastewater effluents from secondary processes, methods of disposal or reuse, sampling and testing requirements and procedures for disposal by irrigation or to surface waters of the state
• Characteristics, operation and maintenance of:

  • Various types of wastewater lagoons and treatment ponds
  • Aerobic and anaerobic sludge-digestion processes
  • Various types of trickling filters and RBC units and modes of activated sludge treatment processes
  • Primary treatment processes and equipment. (Including Imhoff tanks)

How to Get the Wastewater Treatment Plant Operator Class C Contractor’s License in Texas?

1. Meet the following experience and education requirements:
   • High School Diploma or General Equivalency Diploma
   • Two years of work experience; at least one half of the work experience must be obtained in the specific field of the requested license
     • Thirty-two semester hours of College or forty additional hours of Training may substitute one year of work experience
     • Sixteen semester hours of College or twenty additional hours of Approved Training may substitute six months of work experience
2. Submit an online Wastewater Operator Application Form and license fee to the TCEQ
3. Register for an exam at your Local TCEQ Regional Office or your Local Computer-Based Testing Center
4. Expect a response from the Texas Commission on Environmental Quality (TCEQ) after the validation of the process

Texas Wastewater Treatment Plant Operator Class C Contractor License Exam Prep Course

• indicador

Texas Wastewater Treatment Plant Operator Class C Contractor License Exam

Below is all the information related to the trade exam, including the official reference list. All candidates for licensing must fulfill the pre-approval requirements stated by the Texas Commission on Environmental Quality, before they can register to present the computer-based test. Following authorization, applicants may take the initial test plus up to three retests over the course of one year at the corresponding Registered Test Center. Access to the license exam will not be granted if the candidate does not qualify to retake the test. Depending on the testing location, applicants who fail the initial test may retake it (once) immediately and on the same day, but they shall return on another date to attempt the other three of the four chances that are given.

Texas Wastewater Treatment Plant Operator Class C Contractor Trade Exam

• Testing Method: Computer-based; closed book
• Testing Company: TCEQ
• Time Allowed: 3 Hours
• Subjects Involved:
  • Statutes and Rules
  • Permits
  • Design Criteria
  • Safety
  • Laboratory
  • Management
  • General Knowledge
  • Collection
  • Pumping
  • Preliminary Treatment
  • Primary Treatment
  • Ponds
  • Trickling Filters
  • Activated Sludge
  • Process Control
  • Disinfection
  • Sludge Digestion
  • Biosolids Disposal
  • Effluent Disposal
  • Math Problems
• TCEQ Wastewater Treatment Plant Operator Class C Official Content Outline

Texas Wastewater Treatment Plant Operator Class C Contractor Book Set

This set of books includes all required references for the Wastewater Treatment Plant Operator Class C exam. Orders placed before 2 PM are shipped the same day via UPS and a tracking number is emailed before 3 PM.

Texas Wastewater Treatment Plant Operator Class C Contractor Exam Books

Book Not Allowed in Testing

• indicador