Hernando County (Florida) Aluminum Contractor (GITS©) License

Aluminum Contractor means the scope of certification includes and is limited to the execution of contracts requiring the experience, financial means, knowledge and skill necessary for the fabrication, assembling, handling, erection, installation, dismantling, adjustment, alteration, repair, servicing and design work when not prohibited by law, in accordance with accepted engineering data and/or according to manufacturers specifications in the aluminum metal, vinyl and fiberglass screening and allied construction materials. The scope of such work shall include and be limited to screened porches, screened enclosures, pool enclosures, pre-formed panel-post and beam roofs, mobile home panel roof-overs, residential glass window and door enclosures, vinyl panel window enclosures and single story self-contained aluminum utility storage structures not exceeding seven hundred twenty (720) square feet. The scope of the work shall include woodwork incidental to the aluminum and allied materials construction work. It shall be limited to the construction of wood framing for walls of uninhabitable utility storage structures, raised wood decks for enclosures, and the repair and/or replacement of wood incidental to the installation of glass windows and doors, installation of siding, soffit, fascia, gutters, and preformed panel-post and beam roofs. The scope of such work shall comply with all plans, specifications, codes, laws and regulations applicable. The scope of such work shall include masonry concrete work and be limited to foundations, slabs and block kneewalls, incidental to the aluminum and allied materials construction work. The aluminum contractor, whose services are limited, shall not perform any work that alters the structural integrity of the building including but not limited to roof trusses, lintels, load bearing walls and foundations. The aluminum contractor shall subcontract, with a licensed qualified contractor in the field concerned, all other work incidental to that which is defined herein but which is the work of a trade other than that of an aluminum contractor. Nothing in this definition shall be construed to limit or infringe upon the scope of work of any specialty contractor. Persons performing work known as “Aluminum Fabricating” or described as “Non-Structural Aluminum” or otherwise known as work involving: siding, fascia, soffit, gutters and screening, shall obtain certification as either a Specialty Structure Contractor or an Aluminum Fabricating Contractor as set forth and provided herein. Persons providing services involving non-structural aluminum and vinyl products are no longer permitted to conduct such services without proper licensure as provided by this code. As regulated under Florida Statute, a person who has passed a competency examination as an Aluminum Contractor may perform these or related tasks or may supervise persons in his employee in the execution of these tasks.

Aluminum Contractor Courses

• Hernando County (Florida) Aluminum Contractor (GITS) Course

  Course Description: Upon enrolment the student receives an email containing his/her ID and Password combination to access the eCampus. The student can access the eCampus 24/7 for as long as it is necessary until he/she passes all licensing exams. The eCampus contains VIDEOS, PRACTICE QUESTIONS (similar to those seen on the actual exams), typical MATH PROBLEMS with step-by-step solutions, and detailed instructions on how to FIND ANSWERS within the books. The student also has access to optional in-person classroom-style refresher seminars. The training can be completed fully online, but if the student prefers, he/she can go to any number of REFRESHER SEMINARS (no extra charges or limitations).

  Click here for a list of dates and locations of upcoming Refresher Seminars offered for this trade.

  $425.00

  $425.00

• Hernando County (Florida) Business Procedures (GITS) Course

  Course Description: Upon enrolment the student receives an email containing his/her ID and Password combination to access the eCampus. The student can access the eCampus 24/7 for as long as it is necessary until he/she passes all licensing exams. The eCampus contains VIDEOS, PRACTICE QUESTIONS (similar to those seen on the actual exams), typical MATH PROBLEMS with step-by-step solutions, and detailed instructions on how to FIND ANSWERS within the books. The student also has access to optional in-person classroom-style refresher seminars. The training can be completed fully online, but if the student prefers, he/she can go to any number of REFRESHER SEMINARS (no extra charges or limitations).

  Click here for a list of dates and locations of upcoming Refresher Seminars offered for this trade.

  $240.00

  $240.00

Exams For The Aluminum Contractor

Aluminum Exam

• Exam: BAE1Ah
• Testing Method: Open book
• Testing Company: GITS (Gainesville Independent Testing Service)
• Hours Alloted: 2h
• Types of Questions: Multiple Choice
• Number of questions: 50
• Subjects Involved:
  • Concrete
  • Carpentry/Framing
  • Gutters
  • Siding
  • Windows/Doors
  • Estimating
  • Safety
  • Earthwork/Securing

Business Procedures Exam

• Exam: AAE2Ah
• Testing Method: Open Book
• Testing Company: GITS (Gainesville Independent Testing Service)
• Hours Allotted: 2h
• Types of Questions: Multiple Choice
• Number of questions: 50
• Subjects Involved:
  • Insurance Laws
  • Tax Laws
  • Safety
  • Management
  • Lien Laws
  • Employment Laws
  • General Accounting

Aluminum Contractor Bookset

The books set includes all required references for both the Aluminum and Business Procedures exams. Orders placed before 2 PM are shipped the same day via UPS and a tracking number is emailed before 3 PM.

Aluminum Books

OSHA is required for both the business and the trade exams.

• 

  Design and Control of Concrete Mixtures

  Many advances have been made in concrete technology over the decades ranging from new materials and testing methods, to improved concrete properties and construction practices. Concrete construction today follows a mantra of quicker, stronger, more durable, more resilient, and more sustainable. That story is proudly displayed within the pages of this centennial edition of Design and Control of Concrete Mixtures.

  $67.51

  $67.51

  Tabs:

  Yes +$10.00 No (No additional charge) Tabs only, no book ($10.00)

  Quantity:
• 

  Finish Carpentry: A Complete Interior & Exterior Guide

  This book is widely used by contractors trying to pass their county examinations for their license. This finish carpentry book is also used as a reference by contractors on the field.

  $10.09

  $10.09

  Tabs:

  Yes +$10.00 No (No additional charge) Tabs only, no book ($10.00)

  Quantity:
• 

  Formwork for Concrete

  Formwork for Concrete is published by ACI (American Concrete Institute) and is used for contractor testing by several counties in Florida.

  $221.52

  $221.52

  Tabs:

  Yes +$10.00 No (No additional charge) Tabs only, no book ($10.00)

  Quantity:
• 

  All About Roofing and Siding Basics

  Ortho's All About Roofing and Siding Basics is a practical book which uses graphics to show the user how to properly select and install roofing and siding material. The book has become an important reference for contractors in those trades.

  $7.13

  $7.13

  Tabs:

  Yes +$10.00 No (No additional charge) Tabs only, no book ($10.00)

  Quantity:
• 

  CFR (OSHA) Tile 29 Part 1926

  OSHA (CFR 29 Part 1926) is the leading safety reference in the construction industry covering all aspects of construction.

  $36.04

  $36.04

  Tabs:

  Yes +$10.00 No (No additional charge) Tabs only, no book ($10.00)

  Quantity:
• 

  Excavation and Grading Handbook

  Excavation and Grading Handbook is an important reference for excavation contractors, specially those testing in Florida for a county license in said trade.

  $35.87

  $35.87

  Tabs:

  Yes +$10.00 No (No additional charge) Tabs only, no book ($10.00)

  Quantity:
• 

  Guide to Aluminum Construction in High-Wind Areas

  The Guide to Aluminum Construction in High-Wind Areas has a student version which is used for contractor testing in FL.

  $188.40

  $188.40

  Tabs:

  Yes +$10.00 No (No additional charge) Tabs only, no book ($10.00)

  Quantity:

Business Procedures Books

OSHA is required for both the business and the trade exams.

• 

  Florida Contractor's Business Procedures Reference Manual

  This book includes many of the aspects of operating a business related to the construction industry and shows everything there is to know about the proper way to file taxes; what insurance to carry; how to manage daily accounts, and how, when, and why to file a paperwork for a lien.

  $69.43

  $69.43

  Tabs:

  Yes +$10.00 No (No additional charge) Tabs only, no book ($10.00)

  Quantity:
• 

  CFR (OSHA) Tile 29 Part 1926

  OSHA (CFR 29 Part 1926) is the leading safety reference in the construction industry covering all aspects of construction.

  $36.04

  $36.04

  Tabs:

  Yes +$10.00 No (No additional charge) Tabs only, no book ($10.00)

  Quantity: