Flager County Licenses
Construction of any building or structure. Does not include electrical, mechanical, or plumbing work.
Construction of commercial and single-dwelling or multiple-dwelling residential buildings which do not exceed three stories in height. A building contractor can remodel, repair, or improve any size building if the services do not affect the structural members of the building.
Construction of one-family, two-family, or three-family residences not exceeding two (2) habitable stories above no more than one uninhabitable story and accessory use structure in connection therewith.
Installation of roof deck insulation, roof coating, painting, covering, use of sheet metal products incidental to roofing work or other related material, and installation of nonstructural decking and siding.
Swimming Pool/Spa - Commercial
Construction of any swimming pool or hot tub or spa, whether public or private or otherwise, pumps for dewatering purposes, steelwork, light niches, floors, guniting, fiber glassing, installation of tile and coping, installation of all perimeter and filter piping, all filter equipment and chemical feeders of any type, plastering of the interior, decks (slabs incidental to the pool), construction of equipment rooms or housing for pool equipment, and installation of package pool heaters.
Swimming Pool/Spa - Residential
Construction of residential swimming pools, sanitary sewer system nor to potable water lines, nor the grounding and bonding of metal surfaces, nor the making of any electrical connections.
Swimming Pool/Spa - Maintenance
Installation of both public and private pools, spas and hot tubs, both public and private, make minor repairs to existing pool masonry, such as patching cracks in pool bottoms and walls, reline the walls, bottoms of pools and resurface pool decks, install Child-Proof Barrier (Kiddie) Fences, and perform preventive maintenance to equipment such as filters and chlorinators, and to replace pigtailed equipment or identical controls and motors that are incidental to the operation of the swimming pool.
Erection of plumbing, sanitary drainage or storm drainage facilities, venting systems, public and private water supply systems, septic tanks, drainage and supply wells, swimming pool piping; irrigation systems; or solar heating water systems and all appurtenances, apparatus, or equipment used in connection therewith, including boilers and pressure process piping and including the installation of water and storm and sewer lines, water and sewer plants and substations.
Installation of any electrical wires, fixtures, appliances, apparatus, raceways, conduit or any part thereof; which generates, transmits, transforms or utilizes electrical energy in any form for light, heat, power or communications, all in compliance with applicable plans, specifications, codes, laws and regulations
Erection of intrusion detection, fire detection, and signaling systems.
Installation of any electrical wires, apparatus, raceways, conduit or any part thereof on interior or exterior electrical signs and is qualified to erect signs. Shall not include the provision of or any electrical work beyond the last disconnect mean or terminal points.
Master A/C "A"
Installation of air conditioning, refrigeration, heating, ventilation, duct systems, piping vessels, insulation, and related appurtenances within a complete system. Limited to 25 tons cooling and 500,000 BTU heating.
Master A/C "B"
Construction of Ac refrigeration, piping vessels, warm air heating, low and high pressure boilers, ventilation systems, duct systems, insulation & related appurtenances within a complete system unlimited in horsepower or tonnage.
Master Sheet Metal
Installation of sheet and rolled metal of any kind or combination and all other materials used in lieu thereof, and including all air-veyor systems and air handling systems regardless of materials used including all equipment and all reinforcements in connection therewith.
Installation of central air conditioning, refrigeration, heating and ventilation (including duct work in connection with a complete system only to the extent such duct work is performed by the Contractor necessary to make complete an air distribution system) boiler and unfired pressure vessel systems, lift stations, equipment and piping and all appurtenances, apparatus, or equipment used in connection therewith; also piping, insulation of pipes, vessels and ducts, pressure and process piping, pneumatic control piping, gasoline tanks and pump installation and piping for same, fire sprinkling systems and standpipes, air piping, vacuum line piping, oxygen lines, nitrous oxide piping, ink and chemical lines, fuel transmission lines and installation of a condensate drain from an air conditioning unit to an existing safe waste or other approved disposal other than a direct connection to a sanitary system,
Installation of any solar heating system including swimming pool applications, storage and expansion tanks, heat exchangers, piping, valves, pumps, sensors, and low voltage controls that connect to existing plumbing and electrical circuits.
Construction of aluminum structures, including screen rooms with solid or screen roofs, metal siding, soffits, gutters, and awnings.
Construction of any wood products and their modern replacement products in or on a building including, but not limited to, rough framing, structural and nonstructural trusses, conventional rafters and metal framing.
Construction of concrete piers, foundations, walls, structures, slabs, curbs, sidewalks, and driveways.
Installation of Ac refrigeration, piping vessels, warm air heating, low and high pressure boilers, ventilation systems, duct systems, insulation & related appurtenances within a complete system unlimited in horsepower or tonnage.
Garage Door Installer
Erection of residential or commercial type garage doors, including all hardware and operating devices.
Installation of all makes and kinds of glass and glass work, aluminum and glass curtain walls, window walls and the glazing frames, panels, sash and door and holding metal frames.
Installation of shutters and awnings that are designed to protect residential and commercial dwellings from hurricane and storm force winds and windborne debris.
Installation of piping, sprinkler heads, control system components, pumps, and chemical injectors for irrigation of lawns and plant materials.
Construction of seawalls, bulkheads, revetments, docks, piers, wharfs, groins, boat lifts, davits and other marine structures, including pile driving.
Installation of the units or any other unit masonry products, lay brick and other baked clay products, rough cut and dress stone, artificial stone and pre-cast blocks, structural glass brick or block, but shall not place or finish concrete.
Siding, Window, and Door Installer
Installation of said components including vinyl, wood or aluminum siding, soffit, fascia, gutters and all types of windows and doors. This includes the work necessary to prepare or repair the substrate to accomplish proper installation. The scope of this license does not include any structural alterations.
Installation of interior or exterior non-electrical signs according to the building code.
Installation of fencing, including wood, pre-cast concrete and pre-fabricated fences and automatic gates, in compliance with safety, zoning and building codes.
Construction of roads, airport runways and aprons, parking lots, sidewalks, curbs and gutters, property line walls, storm drainage facilities, residential driveways, paver brick/paver systems and to perform the excavating, clearing and grading incidental thereto.
Stucco (Plaster and Lath)
Application of sand, gypsum plaster, quick-lime or hydrated lime and water, or sand and cement and water, or a combination of such other materials that create a permanent coating, including coatings for the purpose of soundproofing and fireproofing; installs lath (including metal studs) or any other material prepared or manufactured to provide a base or bond for such coating, wood and metal lath, or any other material prepared or manufactured to provide key or suction bases for the support of plaster coatings.
Installation of drywall products to wood and metal studs, wood and steel joists, and metal runners in buildings of an unlimited area and height. Also includes the preparation of the surface over which the drywall product is to be applied, including the placing of metal studs and runners and all necessary trim, joint compound, taping, spraying of drywall products, knock-down and popcorn finishes.
Shed Installers (Pre-Fab)
Erection of single story metal buildings up to 500 square feet, including site work, concrete, masonry, siding, roofing, windows and doors but not including any electrical, plumbing, gas or HVAC work.
- Next >>