Friday, September 21, 2018

Contractor Campus

Your One Stop for Licensure!

Article Index

Reference Books for Prov© Exams

  • NASCLA Florida Contractors Guide to Business, Law and Project Management

    NASCLA Florida Contractors Guide to Business, Law and Project Management

    The publisher describes this publication as follows: This book is organized into three sections. Part 1 focuses on planning and starting your business.  This section will help you formulate a business plan, choose a business structure, understand licensing and insurance requirements and gain basic management and marketing skills. Part 2 Covers fundamentals you will need to know in order to operate a successful construction business. This section covers estimating, contract management, scheduling, project management, safety and environmental responsibilities, and building good relationships with employees, subcontractors, and customers. Part 3 provides valuable information to assist you in running the administrative funtions of your business.  Financial management, tax basics, and lien laws are covered.  Effective management of these areas of business is vital and can cause you serious problems if you do not give them proper attention.
    $67.51
    $67.51
    Tabs:
    Quantity:
  • Guide to Aluminum Construction in High-Wind Areas

    Guide to Aluminum Construction in High-Wind Areas

    The Guide to Aluminum Construction in High-Wind Areas is published by the Aluminum Association of Florida is a recognized an outstanding reference which covers in great detail the construction of aluminum-framed patios and related structures in compliance with the new Florida building code. This contractor reference is published by the Aluminum Association of Florida and is widely used by contractors studying for their contractor licensing exams.
    $188.40
    $188.40
    Tabs:
    Quantity:
  • Advanced Mechanical Study Guide

    Advanced Mechanical Study Guide

    Advanced Mechanical Study Guide , 2013. ISBN: 978-1-269-09518-1. Pearson, 501 Boylston Street, Suite 900, Boston, MA 02116. Available at www.provbookstore.com.
    $162.90
    $162.90
    Tabs:
    Quantity:
  • American Electricians Handbook

    American Electricians Handbook

    The American Electrician's Handbook provides the student with all there is to know about designing, maintaining, and operating electrical systems and equipment.. This text focuses on systems and equipment rather than codes and calculations, making it the most practical hands-on guide available today. Product Dimensions: 9.1 x 6.2 x 2.6 inches, Weight: 4.8 Lbs, Autor: Terrell Croft, Publisher: McGraw-Hill Professional, Edition: 16th, ISBN-10: 0071798803, ISBN-13: 978-0071798808
    $71.91
    $71.91
    Tabs:
    Quantity:
  • American National Standards Specifications for the Installation of Ceramic Tile (ANSI A108-A118-A136.1)

    American National Standards Specifications for the Installation of Ceramic Tile (ANSI A108-A118-A136.1)

    No longer available. ANSI A108-A118-A136.1 This is a compilation of voluntary standards for the installation of ceramic tile. This compilation defines the installation, test methods, and physical properties for ceramic tile installation materials.
    Sales price: $0.00
    Quantity:
  • ANSI A300 Tree, Shrub, and Other Woody Plant Maintenance (Parts 1, 2, 3)

    ANSI A300 Tree, Shrub, and Other Woody Plant Maintenance (Parts 1, 2, 3)

    ANSI A300 is an industry standard relating to every aspect of the maintenance of trees, shrubs, and woody plants in general. A careful study and adherence to the standard take the tree care contractor to a higher level of professionalism.
    $63.67
    $63.67
    Tabs:
    Quantity:
  • $39.00
    $39.00
    Tabs:
    Quantity:
  • ANSI A300 (Part 6) 2012: Planting and Transplanting

    ANSI A300 (Part 6) 2012: Planting and Transplanting

    This standard represent the industry criteria for performing tree care operations. This part addresses the following topics: plant and site inspection, timing of transplanting, determining root size, digging trees and shrubs, transplanting methods, lifting plants, moving and storing of plants, digging planting holes, and more.
    $25.66
    $25.66
    Tabs:
    Quantity:
  • ANSI A300 (Part 1) Pruning

    ANSI A300 (Part 1) Pruning

    This standard provides the minimum requirements for the periodic inspection, testing, and maintenance of water-based fire protection systems including land-based and marine applications.
    $25.66
    $25.66
    Tabs:
    Quantity:
  • ANSI Standard Z133.1 - Safety

    ANSI Standard Z133.1 - Safety

    An essential guide covering safety for arborists and workers engaged in tree-related operations addressing safety requirements related to electrical hazards, the use of vehicles and mobile equipment, portable power hand tools, ladders, hand tools, and general work procedures.
    $24.54
    $24.54
    Tabs:
    Quantity:
  • ASTM C1007-11A – Standard Specification for Installation of Load Bearing (Transverse and Axial) Steel Studs and Related Accessories

    ASTM C1007-11A – Standard Specification for Installation of Load Bearing (Transverse and Axial) Steel Studs and Related Accessories

    This book shows the installation and erection requirements for load bearing steel studs and related accessories 0,0329 in (0,836 mm) to 0,1120 in (2,845mm) thick. The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.
    $48.50
    $48.50
    Tabs:
    Quantity:
  • $80.00
    $80.00
    Tabs:
    Quantity:
  • ASTM C926 - Standard Specification for Application of Portland Cement Based Plaster

    ASTM C926 - Standard Specification for Application of Portland Cement Based Plaster

    This specification covers the standard requirements for the application of full thickness Portland cement-based plaster for exterior (stucco) and interior work. It also sets forth tables for proportioning of various plaster mixes and plaster thickness. The materials used shall consist of the following: cement which shall be a Portland cement, air-entraining Portland cement, masonry cement, blended hydraulic cement, air-entraining blended hydraulic cement, or plastic cement; Type S hydrated lime; aggregates such as perlite and sand for base and job-mixed finish coats; water to be used in mixing; admixtures; and fibers. Surfaces of solid bases such as masonry, stone, cast-in-place or precast concrete shall be prepared either by sandblasting, wire brushing, acid etching, chipping, or a combination thereof. Details on curing to resist cracking; materials protection and storage; environmental conditions; and application of plaster, finish-coat, and fog-coat, which shall be done by hand or machine up to the specified nominal thickness on metal and solid plaster bases are discussed.
    $86.00
    $86.00
    Tabs:
    Quantity:
  • ASTM D4756-06: Standard Practice for Installation of Rigid Poly (Vinyl Chloride) (PVC) Siding and soofit

    ASTM D4756-06: Standard Practice for Installation of Rigid Poly (Vinyl Chloride) (PVC) Siding and soofit

    Standard covering the minimum requirements and methods for the installation, preparation, and adequate use of materials and application of rigid vinyl, siding soffit and accessories on the exterior wall and soffit areas of buildings.
    $68.64
    $68.64
    Tabs:
    Quantity:
  • Basic Safety

    Basic Safety

    This guide explains the safety responsibilities of workers, supervisors, and managers to ensure a safe workplace. I covers causes and results of accidents and the impact of accident costs. Safe work procedures, and proper use of PPEs. Core Curriculum: Introductory Craft Skills Basic Safety , 2009. Prentice Hall, P.O. Box 11071, Des Moines, IA 50336. available at www.provbookstore.com or http://nccer.pearsonconstructionbooks.com 9780134075563 is now available (5th Edition) Number of Pages: 83 Product Dimensions: 11" x 8 1/2" x 1/2" Weight: 0.4 Lbs ISBN-10: 0136098754 ISBN-13: 9780136098751
    $24.00
    $24.00
    Tabs:
    Quantity:
  • Builder's Guide to Swimming Pool Construction

    Builder's Guide to Swimming Pool Construction

    244 pages; Publisher: Builder's Book (October 1, 2005); Language: English; ISBN-10: 1889892505; ISBN-13: 978-1889892504; Product Dimensions: 10.9 x 8.2 x 0.5 inches; Shipping Weight: 1.2 pounds
    $75.00
    $75.00
    Tabs:
    Quantity:
  • Building Code Requirements for Masonry Structures

    Building Code Requirements for Masonry Structures

    Building Code Requirements for Masonry Structures. 2011. American Concrete Institute, 38800 International Way, Country Club Dr, P.O. Box 9094, Farmington Hills, MI 48333. Available at http://www.concrete.org/.
    $145.90
    $145.90
    Tabs:
    Quantity:
  • Building Code Requirements for Structural Concrete 2011 ( ACI318-11)

    Building Code Requirements for Structural Concrete 2011 ( ACI318-11)

    A very detailed and helpful reference covering materials, design, and construction of structural concrete (used in buildings or non-building structures, where applicable). Building Code Requirements for Structural Concrete 2011 ( ACI318-11) , 2011. American Concrete Institute, 38800 International Way, Country Club Dr, P.O. Box 9094, Farmington Hills, MI 48333. Available at http://www.concrete.org/. 9780870317446
    $249.90
    $249.90
    Tabs:
    Quantity:
  • Carpentry Level One

    Carpentry Level One

    Carpentry Level One , 2006. ISBN: 978-0-13-229268-9. Prentice Hall, P.O. Box 11071, Des Moines, IA 50336. Available at http://nccer.pearsonconstructionbooks.com.
    $80.57
    $80.57
    Tabs:
    Quantity:
  • Pool & Spa Operator Handbook

    Pool & Spa Operator Handbook

    The Pool & Spa Operator Handbook explains how to mitigate risks related to the use of swimming pools like drowning, suction entrapment, spine injuries and chemical hazards, to name a few. It is also a very powerful teaching/learning tool for contractors trying to understand the ins and outs of swimming pool and spa service. It has numerous tables which show the user which chemicals to use and at which concentrations to achieve specific goals. Number of Pages: 278, Product Dimensions: 10 7/8" x 9" x 3/4", Weight: 7.6 Lbs, ISBN: 978-0984586370, 0984586377
    $65.95
    $65.95
    Tabs:
    Quantity:
  • CFR (OSHA) Tile 29 Part 1926

    CFR (OSHA) Tile 29 Part 1926

    In this text, specifically written for construction industry compliance, you will be able to find all the information needed to meet OSHA standards. In addition to a complete collection of Part 1926 regulations for the construction industry, the book also contains Part 1903 on Inspections, Citations, and Penalties; Part 1904 concerning Recording and Reporting Occupational Illnesses and Injuries; and relevant selections from Part 1910 for General Industry. Number of Pages: 566 Product Dimensions: 11 x 8 1/2 x 1 1/8 Weight: 2.8 Lbs Publisher: Mancomm ISBN-10: 1599595664
    $33.62
    $33.62
    Tabs:
    Quantity:
  • Concrete Finishing Level One

    Concrete Finishing Level One

    Concise yet powerful academic tool to understand the ins and outs of concrete finishing. It examines subjects as diverse as construction and finishing, safety requirements, properties of concrete,tools and equipment, placing preparation, placing, and finishing. Concrete Finishing Level One , 1998. ISBN: 978-0-13-010246-1. Prentice Hall, P.O. Box 11071, Des Moines, IA 50336. Available at http://nccer.pearsonconstructionbooks.com.
    $86.67
    $86.67
    Tabs:
    Quantity:
  • Concrete Finishing Level Two

    Concrete Finishing Level Two

    Concrete Finishing Level Two , 1999. ISBN: 978-0-13-014860-5. Prentice Hall, P.O. Box 11071, Des Moines, IA 50336. Available at http://nccer.pearsonconstructionbooks.com.
    $116.57
    $116.57
    Tabs:
    Quantity:
  • Concrete Pipe & Box Culvert Installation

    Concrete Pipe & Box Culvert Installation

    Concrete Pipe and Box Culvert Installation is a guide for a proper installation of concrete pipe and box culverts, including standard installations, jointing, alignment, testing, and more. Number of Pages: 90 Product Dimensions: 7 x 4 1/4 x 1/4" Weight: 0.1 Lbs Publisher: American Concrete Pipe Association ISBN-10: 0615551653 ISBN-13: 978-0615551654
    $24.40
    $24.40
    Tabs:
    Quantity:
  • Damage Prevention Guide / Excavation Guide (Includes FL Statute Ch. 556 Underground Facility Damage Prevention and Safety Act)

    Damage Prevention Guide / Excavation Guide (Includes FL Statute Ch. 556 Underground Facility Damage Prevention and Safety Act)

    The Damage Prevention Guide is a how-to guide for the prevention of excavation damage. Explains all the steps in the process of ensuring one’s excavation does not end up on the evening news. It covers everything from dialing 811 to scheduling a visit and more. Number of Pages: 92 Product Dimensions: 6 x 4 x 3/16" Weight: 0.2 Lbs
    $12.00
    $12.00
    Tabs:
    Quantity:
  • Drywall Level One

    Drywall Level One

    Drywall Level One provides an introduction to design, technical hints and tips from industry experts, plus review questions. Subjects such as orientation to the trade, construction materials and methods, thermal and moisture protection, and drywall installation. Drywall Level 1 , 2007. ISBN: 978-0-13-604512-0. Prentice Hall, P.O. Box 11071, Des Moines, IA 50336. Available at http://nccer.pearsonconstructionbooks.com. Product Dimensions: 3 10/4" x 8 1/2" x 1/2" Weight: 1.2 Lbs Publisher: Prentice Hall, P.O ISBN-10: 013604512x ISBN-13: 9780136045120
    $107.20
    $107.20
    Tabs:
    Quantity:
  • Drywall Level Two

    Drywall Level Two

    This trainee guide maintains the structure of Level 1 while going a bit deeper into the subjects of Commercial Drawings, Steel Framing, Acoustical Ceilings, Interior Specialties, Exterior Cladding, and Specialty Finishes. Drywall Level 2 , 2009. ISBN: 978-0-13-604480-2. Prentice Hall, P.O. Box 11071, Des Moines, IA 50336. Available at http://nccer.pearsonconstructionbooks.com. Product Dimensions: 10 3/4" x 8 1/2" x 1/2" Weight: 1.2 Lbs Publisher: Prentice Hall ISBN-10: 0136044808 ISBN-13: 9780136044802
    $147.28
    $147.28
    Tabs:
    Quantity:
  • Fences and Retaining Walls

    Fences and Retaining Walls

    Fences and Retaining Walls is a user-friendly manual for building professional-quality boundary markers and retaining structures including picket and chain fences. It also covers the fundamental aspects of fencing and wall building including gates, wiring, and plumbing in retaining walls, rock walls, and much more. Number of Pages: 396 Product Dimensions: 11" x 8 1/2" x 5/8" Weight: 2.0 Lbs Autor: William McElroy ISBN-10: 0934041539
    $43.20
    $43.20
    Tabs:
    Quantity:
  • FL DOT Utility Accommodation Manual

    FL DOT Utility Accommodation Manual

    Utility Accommodation Manual is a publication by the Florida Department of Transportation which provides detailed information from virtually all aspects of the installation of underground utilities. Number of Pages: 32 Product Dimensions: 11 x 8 5/8 x 1/8" Weight: 0.2 Lbs Autor: Florida Department of Transportation
    $8.89
    $8.89
    Tabs:
    Quantity:
  • Study Guide for Structural Steel

    Study Guide for Structural Steel

    2012 Study Guide for Structural Steel , 2012. ISBN: 978-1-269-08432-1. Pearson, 501 Boylston Street, Suite 900, Boston, MA 02116. Available at www.provbookstore.com
    $78.84
    $78.84
    Tabs:
    Quantity:
  • Chapter 62-610 (Florida) Reuse of Reclaimed Water and Land Application

    Chapter 62-610 (Florida) Reuse of Reclaimed Water and Land Application

    These rules shall be construed to assure that all waters of the state shall be free from components of wastewater discharges which, alone or in combination with other substances, are acutely toxic; are present in concentrations which are carcinogenic, mutagenic, or teratogenic to humans, animals, or aquatic species; or otherwise pose a serious threat to the public health, safety, and welfare. Number of Pages: 69 Product Dimensions: 11 x 8 5/8 x 3/8" Weight: 0.8 Lbs Publisher: State of Florida Number of Pages: 69 Product Dimensions: 11 x 8 5/8 x 3/8" Weight: 0.8 Lbs Publisher: State of Florida
    $15.27
    $15.27
    Tabs:
    Quantity:
  • Chapter 64E-6, FAC, Standards for Onsite Sewage Treatment and Disposal Systems

    Chapter 64E-6, FAC, Standards for Onsite Sewage Treatment and Disposal Systems

    Chapter 64E-6, FAC, Standards for Onsite Sewage Treatment and Disposal Systems, includes a complete guide on standard codes, referenced policies and procedures for onsite sewage treatment and disposal systems. Number of Pages: 82 Product Dimensions: 11 x 8 5/8 x 3/16" Weight: 0.6 Lbs
    $16.70
    $16.70
    Tabs:
    Quantity:
  • Florida Administrative Code Chapter 64E-9 Public Swimming Pools and Bathing Places

    Florida Administrative Code Chapter 64E-9 Public Swimming Pools and Bathing Places

    Chapter 64E-9 Public Swimming Pools and Bathing Places is an important reference for the general public and any participant involved in the operation or life cycle of a non-private swimming pool. It is equally important to contractors wishing to obtain their contractor’s license for swimming pool and spa maintenance, or a pool and spa license for the construction of such structures. Number of Pages: 21 Product Dimensions: 11" x 8 5/8" x 1/4" Weight: .2 Lbs
    $7.81
    $7.81
    Tabs:
    Quantity:
  • Florida Building Code - Building

    Florida Building Code - Building

    The Florida Building Code (2017) is the most complete source of code standards and compliance information in the construction industry. It is arguably the single-most important book in the construction industry since it defines the standards with which construction products and installations must comply throughout the construction process. It is for this reason that the Florida Building Code is one of the most heavily-tested reference books in the Florida construction contractor licensing exams. Product Dimensions: 11 3/4" x 13" x 5 1/4" Weight: 8.6 Lbs Author: International Code Council Publisher: Delmar Cengage Learning Edition: 2017 ISBN-10: 160983562X ISBN-13: 9781609835576
    $131.04
    $131.04
    Tabs:
    Quantity:
  • Florida Building Code - Energy Conservation

    Florida Building Code - Energy Conservation

    The 2017 Florida Energy Conservation Code is a statewide energy code based on the International Energy Conservation Code (IECC), it is published by the International Code Council and it provides a standard code for the use of energy in new and existing buildings in the State of Florida.
    $39.00
    $39.00
    Tabs:
    Quantity:
  • Florida Building Code - Plumbing

    Florida Building Code - Plumbing

    The 2017 Florida Pluming Code (6th Edition) is published by the International Code Council is a fully integrated code contains the standard codes and regulations for plumbing facilities in the State of Florida.
    $83.46
    $83.46
    Tabs:
    Quantity:
  • Florida Building Code - Residential

    Florida Building Code - Residential

    The 6th edition (2017) Florida Residential Code is published by the International Code Council and is based on the International Code. It describes the code compliance requirements for the construction of residential structures in the State of Florida.
    $123.24
    $123.24
    Tabs:
    Quantity:
  • Florida Building Code - Fuel Gas

    Florida Building Code - Fuel Gas

    The 2017 Florida Fuel Gas Code is a comprehensive standard which establishes minimum regulations for fuel gas systems and gas-fired appliances using prescriptive and performance-related provisions. It is founded on broad-based principles that make possible the use of new materials and new fuel gas system and appliance designs
    $83.46
    $83.46
    Tabs:
    Quantity:
  • Florida Building Code - Mechanical

    Florida Building Code - Mechanical

    The 2017 Florida Mechanical Code (6th Edition) is published by the International Code Council and it provides the standards for the safe and effective design and installation of current mechanical systems in Florida.
    $83.46
    $83.46
    Tabs:
    Quantity:
  • Fundamentals of Hydraulic Dredging

    Fundamentals of Hydraulic Dredging

    Fundamentals of Hydraulic Dredging presents the basic principles of hydraulic dredging in great detail. This book is a great source of information for contractors in the hydraulic dredging trade. Product Dimensions: 6.00 x 8.90 x 0.70 inches Number of Pages: 258 pages Publisher: American Society of Civil Engineers ISBN-13: 9780784401477
    $67.65
    $67.65
    Tabs:
    Quantity:
  • GANA Glazing Manual

    GANA Glazing Manual

    This manual is recognized as the definitive source in glass and glazing fields. This manual includes complete information about primary and fabricated glass products, quality standards, testing considerations, and general/specific guidelines in hazardous locations. Number of Pages: 194 Product Dimensions: 11" x 8 1/2" x 1/2" Weight: 1.8 Lbs Publisher: Glass Assocaition of North America Edition: 50th Anniversary
    $87.40
    $87.40
    Tabs:
    Quantity:
  • GANA Sealant Manual

    GANA Sealant Manual

    The GANA Sealant Manual, published by the Glass Association of North America, provides guidelines for the selection and application of sealants used in exterior and interior glass and glazing installations. Manual sections include causes of sealant failures, structural glazing and glazing accessories. Number of Pages: 93 Product Dimensions: 8.3 x 5.5 x 1.8 inches Weight: 1.0 Lbs Publisher: GLASS Edition: 2008
    $87.40
    $87.40
    Tabs:
    Quantity:
  • Guide to Shotcrete – ACI 506R

    Guide to Shotcrete – ACI 506R

    Guide to shotcrete provides information on materials and properties of both dry-mix and wet-mix shotcrete, covering most facets of the shotcrete application process. It includes application procedures, equipment requirements, pre-construction, pre-qualification, and acceptance testing of workers, materials, and finished shotcrete.
    $104.94
    $104.94
    Tabs:
    Quantity:
  • Gypsum Construction Handbook

    Gypsum Construction Handbook

    The Gypsum Construction Handbook covers new construction, repair, and remodeling; it include information on framing drywall and plaster finishing of interiors. Paperback: 576 pages Publisher: RSMeans; 7 edition (March 3, 2014) Language: English ISBN-10: 1118749847 ISBN-13: 978-1118749845 Product Dimensions: 5.4 x 1.2 x 8.4 inches Shipping Weight: 1.4 pounds
    $35.00
    $35.00
    Tabs:
    Quantity:
  • Hurricane Shutter Designs

    Hurricane Shutter Designs

    Hurricane Shutter Designs is a technical publication by the APA. The APA is a nonprofit trade association that represents U.S. and Canadian manufacturers of structural engineered wood products, including plywood, oriented strand board (OSB), glued-laminated timber (glulam), wood I-joists and structural composite lumber. Its primary functions are product certification and testing, applied research, and market support and development. The Hurricane Shutter Designs publication is without a doubt an outstanding contribution to the Hurricane Shutters field and to all hurricane protection contractors. Number of Pages: 18 Product Dimensions: 11 x 8 1/2 x 3/16 Weight: 0.2 Lbs
    $19.75
    $19.75
    Tabs:
    Quantity:
  • HVAC Basics for Contractors

    HVAC Basics for Contractors

    HVAC Basics for Contractors, 2nd Edition , 2013. ISBN: 978-1-269-23865-6. Pearson, 501 Boylston Street, Suite 900, Boston, MA 02116. Available at www.provbookstore.com.
    $108.18
    $108.18
    Tabs:
    Quantity:
  • HVAC Level Three

    HVAC Level Three

    Paperback: 688 pages; Publisher: Prentice Hall; 4 edition (January 20, 2014); Language: English; ISBN-10: 0133750833; ISBN-13: 978-0133750836; Product Dimensions: 8.5 x 1 x 10.8 inches; Shipping Weight: 2.6 pounds; The publisher describes it as follows: This exceptionally produced trainee guide features a highly illustrated design, technical hints and tips from industry experts, review questions and a whole lot more! Key content includes: Fasteners, Hardware and Wiring Terminations, Control Circuit and Motor Troubleshooting, Troubleshooting Cooling, Troubleshooting Heat Pumps, Troubleshooting Gas Heating, Troubleshooting Oil Heating, Troubleshooting Accessories, Zoning, Ductless, and Variable Refrigerant Flow Systems, Commercial Hydronic Systems, Steam Systems, Retail Refrigeration Systems, and Customer Relations.
    $125.33
    $125.33
    Tabs:
    Quantity:
  • HVAC Level Two Trainee Guide

    HVAC Level Two Trainee Guide

    Paperback: 744 pages; Publisher: Prentice Hall; 4 edition (November 8, 2013); Language: English; ISBN-10: 0133404277; ISBN-13: 978-0133404272; Product Dimensions: 8.4 x 1.2 x 10.7 inches; Shipping Weight: 3 pounds; The publisher describes is as follows: This exceptionally produced trainee guide features a highly illustrated design, technical hints and tips from industry experts, review questions and a whole lot more! Key content includes: Commercial Airside Systems, Chimneys, Vents, and Flues, Introduction to Hydronic Systems, Air Quality Equipment, Leak Detection, Evacuation, Recovery, and Charging, Alternating Current, Basic Electronics, Introduction to Control Circuit Troubleshooting, Troubleshooting Gas Heating, Troubleshooting Cooling, Heat Pumps, Basic Installation and Maintenance Practices, Sheet Metal Duct Systems, and Fiberglass and Flexible Duct Systems.
    $128.00
    $128.00
    Tabs:
    Quantity:
  • Concrete Paver Installers Manual

    Concrete Paver Installers Manual

    ICPI Certified Concrete Paver Installer Manual, 8th Edition. Interlocking Concrete Pavement Institute (ICPI), 1444 I Street NW, Suite 700, Washington, DC 20005-2210, www.icpi.org
    $120.00
    $120.00
    Tabs:
    Quantity:
  • Installation Guide for Ductile Iron Pipe

    Installation Guide for Ductile Iron Pipe

    The Installation Guide for Ductile Iron Pipe simply has everything there is to know about Ductile Iron Pipe. It is a great resource for contractors in the underground utilities field, not to mention a great tool for those contractors trying to pass their contractor exams for their license. Number of Pages: 104 Product Dimensions: 7 x 4 x 1/8" Weight: 0.2 Lbs Autor: Ductile Iron Pipe Research Association Publisher: Ductile Iron Pipe Research Association ISBN-10: 0964219409 ISBN-13: 9780964219403
    $15.34
    $15.34
    Tabs:
    Quantity:
  • Insulating Level Three

    Insulating Level Three

    By NCCER Pub. Date: Nov 3, 1997 by Pearson. ISBN-10: 0-13-909458-X ISBN-13: 978-0-13-909458-3 Copyright: 1997 Edition: 1st This exceptionally produced trainee guide features a highly illustrated design, technical hints and tips from industry experts, review questions and a whole lot more! Key content includes Trade Math, Air Duct Systems, Theory of Heat Transfer and Moisture Effects, Adhesives and Their Uses, Steam, Condensate, and Process Water Systems, Large Boilers, Breechings, Precipitators, and Apparatus, Refrigeration and Cryogenic Systems, Specialized Insulation Systems, Blueprints and Specifications, Jacketing Fabrication — Piping and Fittings, Jacketing Fabrication — Vessels and Equipment and Sheet Metal Lagging.
    $112.78
    $112.78
    Tabs:
    Quantity:
  • Insulating Level Two

    Insulating Level Two

    By . NCCER Pub. Date: Sep 26, 1997 by Pearson. ISBN-10: 0-13-909417-2 ISBN-13: 978-0-13-909417-0 Copyright: 1997 Edition: 1st This exceptionally produced trainee guide features a highly illustrated design, technical hints and tips from industry experts, review questions and a whole lot more! Key content includes Installing Flexible Foam Insulation, Installing Blanket Insulation for Ducts, Installing Board Insulation for Ducts, Installing Calcium Silicate/expanded Perlite Pipe Insulation, Installing Mineral Wool Insulation, Installing Rigid Foam Insulation, Installing Board and Block Insulation, Cement and Fabric Finishes & Mastics, Plumbing Systems and Chilled and Hot Water Heating Systems.
    $112.78
    $112.78
    Tabs:
    Quantity:
  • Intermediate Mechanical Study Guide

    Intermediate Mechanical Study Guide

    Intermediate Mechanical Study Guide , 2013. ISBN: 978-1-269-09524-2. Pearson, 501 Boylston Street, Suite 900, Boston, MA 02116. Available at www.provbookstore.com.
    $165.05
    $165.05
    Tabs:
    Quantity:
  • Ironworking Level One

    Ironworking Level One

    Ironworking Level 1 is an outstanding textbook on the basics of ironworking which covers safety, tools and equipment, fastening, cranes, rigging equipment and practices, drawings, structural, plumbing, aligning, guying, oxyfuel cutting, arc welding, bar joists and girders.Ironworking Level One , 2011. ISBN: 978-0-13-213714-0. Prentice Hall, P.O. Box 11071, Des Moines, IA 50336. Available at http://nccer.pearsonconstructionbooks.com.
    $86.67
    $86.67
    Tabs:
    Quantity:
  • Ironworking Level Two

    Ironworking Level Two

    Number of Pages: 486 Product Dimensions: 8-1/2" x 11" inches Copyright: 2012 Edition: 2nd ISBN-13: 978-0-13-257822-6
    $123.60
    $123.60
    Tabs:
    Quantity:
  • Ironworking Level Three

    Ironworking Level Three

    Ironworking Level Three. Prov. 978-0-13-257785-4
    $125.33
    $125.33
    Tabs:
    Quantity:
  • ISEE Blasters' Handbook

    ISEE Blasters' Handbook

    This guide is a must-have reference for anyone in the blasting or demolition contracting fields. This reference contains safety and security guidelines, and detailed examples of inventory control measures. It describes how to work with current regulatory agencies while effectively communicating through the preliminary design process. This reference lays the foundation on how to build a safe and efficient blast plan. It is an outstanding publication by the International Society of Explosive Engineers. Product Dimensions: 10 x 8 x 2 inches Weight: 6.3 pounds, Autor: Jon F. Stiehr (Editor), Jeffrey L. Dean (Editor), Publisher: Intl Society of Explosives, Number of Pages 1040 pages, ISBN-10: 189239619X, ISBN-13: 978-1892396198. For Prov Exams ISEE Blasters' Handbook . ISBN: 978-1892396006. International Society of Explosives Engineers, 30325 Bainbridge Road, Cleveland, OH 44139. Available at www.isee.org.
    $238.60
    $238.60
    Tabs:
    Quantity:
  • Landscaping Principles and Practices

    Landscaping Principles and Practices

    Landscaping Principles and Practices, 592 pages; Publisher: Delmar Cengage Learning; 7 edition (January 9, 2009); ISBN-10: 1428376410; ISBN-13: 978-1428376410; Product Dimensions: 10.8 x 8.9 x 1 inches; Shipping Weight: 3.1 pounds
    $69.92
    $69.92
    Tabs:
    Quantity:
  • Low Voltage Wiring: Security/Fire-Alarm Systems

    Low Voltage Wiring: Security/Fire-Alarm Systems

    400 pages; Publisher: McGraw-Hill Education; 1 edition (September 17, 2001); Language: English; ISBN-10: 0071376747; ISBN-13: 978-0071376747; Product Dimensions: 7.4 x 1 x 9.2 inches; Shipping Weight: 2 pounds; This book is described as the A-Z reference on designing, installing, maintaining, and troubleshooting modern security and fire alarm systems is now fully up-to-date in a new edition. Prepared by Terry Kennedy and John E. Traister, authors with over three decades of hands-on experience apiece in the construction industry, Low Voltage Wiring: Security/Fire Alarm Systems, Third Edition provides all the appropriate wiring data you need to work on security and fire alarm systems in residential, commercial, and industrial buildings. A CD-ROM packaged with the book conveniently puts at your fingertips sample forms, checklists, a fully-searchable glossary, and hot-linked industry reference URLs.
    $38.54
    $38.54
    Tabs:
    Quantity:
  • Manual N - Commercial Load Calculation

    Manual N - Commercial Load Calculation

    Paperback: 650 pages; Publisher: Air Conditioning Contractors of America; Language: English; ISBN-10: 1892765381; ISBN-13: 978-1892765383; Product Dimensions: 10.9 x 8.4 x 1.3 inches; Shipping Weight: 3.6 pounds; The publisher describes it as follows: This edition of Manual N, from the Air Conditioning Contractors of America (ACCA), details the correct HVAC load calculation procedure for small and mid-size commercial buildings. This new edition addresses advances in the commercial construction industry, such as new materials, methods of assembly, and operational requirements. It provides instruction to help contractors and designers satisfy new (and often conflicting) energy, ventilation, and comfort requirements. Manual N is divided into four sections providing both a quick procedure, and a more comprehensive procedure, based on the requirements of your application.
    $122.39
    $122.39
    Tabs:
    Quantity:
  • Masonry Level One

    Masonry Level One

    This reference covers all basic-level subjects related to the masonry trade, like tools, equipment, measurements, drawings, specifications, mortar, and masonry units and installation techniques. Masonry Level One , 2014. ISBN: 9780133402483. Prentice Hall, P.O. Box 11071, Des Moines, IA 50336. Available at http://nccer.pearsonconstructionbooks.com
    $86.67
    $86.67
    Tabs:
    Quantity:
  • Masonry Level Two

    Masonry Level Two

    Masonry Level 2 Trainee Guide, 4th Edition By . NCCER Pub. Date: Jun 5, 2014 by Pearson. ISBN-10: 013377970X ISBN-13: 9780133779707 Copyright: 2015 Dimensions: 8-1/2" x 10-7/8" Pages: 384 Edition: 4th This exceptionally produced trainee guide features a highly illustrated design, technical hints and tips from industry experts, review questions and a whole lot more! Key content includes: Residential Plans and Drawing Interpretation, Residential Masonry, Reinforced Masonry, Grout and Other Reinforcement, Masonry Openings and Metal Work, Advanced Laying Techniques, Effect of Climate on Masonry, and Construction Inspection and Quality Control.
    $125.33
    $125.33
    Tabs:
    Quantity:
  • Masonry Level Three

    Masonry Level Three

    Masonry Level Three , 2005. ISBN: 978-0-13-109169-6. Prentice Hall, P.O. Box 11071, Des Moines, IA 50336. Available at http://nccer.pearsonconstructionbooks.com. ISBN: 9780133750454 is available now (4th Edition)
    $116.93
    $116.93
    Tabs:
    Quantity:
  • MS-19 Basic Asphalt Emulsion Manual

    MS-19 Basic Asphalt Emulsion Manual

    MS-19 Provides information about when, where, and how emulsions should be used. This manual will help professionals evaluate pavement systems for construction and maintenance, and chose the emulsion that best fits a project’s specific conditions. Number of Pages: 97 Product Dimensions: 11" x 8 3/8" x 1/4" Weight: 0.6 Lbs Publisher: AEMA ISBN-13: 9781934154564
    $78.50
    $78.50
    Tabs:
    Quantity:
  • NFPA 13 Standard for the Installation of Sprinkler Systems

    NFPA 13 Standard for the Installation of Sprinkler Systems

    NFPA 13 addresses the requirements for sprinkler systems including design, installation, and acceptance testing; hanging and bracing systems, underground piping, and seismic protection.
    $107.04
    $107.04
    Tabs:
    Quantity:
  • NFPA 13D Standard for the Installation of Sprinkler Systems on One-Two Family Dwellings and Mobile Homes

    NFPA 13D Standard for the Installation of Sprinkler Systems on One-Two Family Dwellings and Mobile Homes

    NFPA 13D (Installation of Sprinkler Systems on One-Two Family Dwellings and Mobile Homes) covers the design, installation, and maintenance of automatic sprinkler systems for protection against fire hazards in one and two family dwellings and manufactured homes.
    $53.28
    $53.28
    Tabs:
    Quantity:
  • NFPA 13R Standard for the Installation of Sprinkler Systems in Residential Occupancies Up to and Including Four Stories in Height

    NFPA 13R Standard for the Installation of Sprinkler Systems in Residential Occupancies Up to and Including Four Stories in Height

    NFPA 13R is a residential sprinkler design standard focused on low-rise residential occupancies. The Standard's intent is to provide a sprinkler system that aids in the control of residential fires and provides improved protection against injury and life loss in multi-family dwellings.
    $48.48
    $48.48
    Tabs:
    Quantity:
  • NFPA 241 Safeguarding Construction, Alteration, and Demolition Operations

    NFPA 241 Safeguarding Construction, Alteration, and Demolition Operations

    NFPA 241 Safeguarding Construction, Alteration, and Demolition Operations provides standards applicable to structures in the course of construction, alteration, or demolition, including underground locations. For Prov Exams NFPA 241 Safeguarding Construction, Alteration and Demolition Operations . National Fire Protection Association, 1 Batterymarch Park, Quincy, MA 02169-7471. Available at www.nfpa.org.
    $51.06
    $51.06
    Tabs:
    Quantity:
  • NFPA 58 – Standard for the Storage and Handling of Liquefied Petroleum Gases (LP Gas Code)

    NFPA 58 – Standard for the Storage and Handling of Liquefied Petroleum Gases (LP Gas Code)

    NFPA 58 – Standard for the Storage and Handling of Liquefied Petroleum Gases (LP Gas Code). 978-145590711-3
    $71.45
    $71.45
    Tabs:
    Quantity:
  • NFPA 70 - National Electrical Code

    NFPA 70 - National Electrical Code

    The NEC (published by the NFPA) addresses the installation of electrical conductors, equipment, and raceways; signaling and communications conductors, equipment, and raceways; and optical fiber cables and raceways in commercial, residential, and industrial occupancies. It is a great reference for any electrician practicing the electrical trade as well as for any contractor trying to obtain an electrical contractor's license. Paperback: 910 pages Publisher: National Fire Protection Association; 1 edition (October 2, 2013) Language: English ISBN-10: 1455906727 ISBN-13: 978-1455906727 Product Dimensions: 1.2 x 8.2 x 10.5 inches Shipping Weight: 3.7 pounds
    $99.36
    $99.36
    Tabs:
    Quantity:
  • NFPA 780 Standard for the Installation of Lightning Protection Systems, 2014 Edition

    NFPA 780 Standard for the Installation of Lightning Protection Systems, 2014 Edition

    This standard covers traditional lighting protection system installation requirements for ordinary structures, miscellaneous structures and special occupancies, heavy-duty stacks, watercraft, wind turbines, structures housing explosive materials, and structures containing flammable vapors and flammable gasses or liquids that give off flammable vapors. ISBN: 9781455907205.
    $62.40
    $62.40
    Tabs:
    Quantity:
  • NRCA Roofing Manual, Volumes 1-4

    NRCA Roofing Manual, Volumes 1-4

    This four-volume manual gives you comprehensive information about low- and steep-slope roof system design, materials and installation. It is essential to Roofing Contractors across the United States.
    $498.00
    $498.00
    Tabs:
    Quantity:
  • NRCA Roofing Manual: Membrane Roof System

    NRCA Roofing Manual: Membrane Roof System

    This manual provides best industry practices and technical information about the design, materials and installation techniques applicable to membrane roof systems used in low-slope applications.
    $120.00
    $120.00
    Tabs:
    Quantity:
  • NRCA Roofing Manual: Metal Panel and SPF Roof Systems

    NRCA Roofing Manual: Metal Panel and SPF Roof Systems

    The Metal Panel and SPF Roof Systems is one of the components of the NRCA Roofing Manual.
    $120.00
    $120.00
    Tabs:
    Quantity:
  • NRCA Roofing Manual: Steep-slope Roof Systems

    NRCA Roofing Manual: Steep-slope Roof Systems

    This volume of the NRCA Roofing Manual provides five complete sections—Asphalt Shingle Roof Systems, Clay and Concrete Roof Systems, Metal Shingle and Synthetic Component Roof Systems, Slate Roof Systems, and Wood Shake and Wood Shingle Roof Systems
    $120.00
    $120.00
    Tabs:
    Quantity:
  • NRCA Roofing Manual: Architectural Metal Flashing, Condensation Control and Reroofing

    NRCA Roofing Manual: Architectural Metal Flashing, Condensation Control and Reroofing

    NRCA Roofing Manual: Architectural Metal Flashing, Condensation Control and Reroofing. This manual contains information about the design, materials and installation techniques applicable to architectural sheet-metal components. In addition, this manual provides background information regarding moisture and air leakage issues in buildings such has ventilation for steep-slope roof assemblies and condensation control for low-slope roof systems.
    $120.00
    $120.00
    Tabs:
    Quantity:
  • NRCA Waterproofing Manual

    NRCA Waterproofing Manual

    The NRCA Waterproofing Manual provides the latest information on proper design, quality materials and workmanship, water-stops, warranties, material storage, and handling. This manual should be used as a guideline to prepare proper specifications. Number of Pages: 137 Product Dimensions: 10 3/4 x 8 1/2 x 3/8" Weight: 0.8 Lbs Publisher: National Roofing Contractors Association
    $72.00
    $72.00
    Tabs:
    Quantity:
  • Painting Level One

    Painting Level One

    Painting Level One is an introductory guide to the painting trade explaining diverse subjects like careers, safety, ladders, scaffolds, lifts, and fall protection, identifying surface/substrate materials and conditions, protecting adjacent surfaces,and basic surface preparation. Painting Level One , 1997. ISBN: 978-0-13-771239-7. Prentice Hall, P.O. Box 11071, Des Moines, IA 50336. Available at http://nccer.pearsonconstructionbooks.com
    $80.93
    $80.93
    Tabs:
    Quantity:
  • Painting Level Two

    Painting Level Two

    Painting Level Two , 1997. ISBN: 978-0-13-771296-0. Prentice Hall, P.O. Box 11071, Des Moines, IA 50336. Available at http://nccer.pearsonconstructionbooks.com.
    $130.00
    $130.00
    Tabs:
    Quantity:
  • Pile Design and Construction Practice

    Pile Design and Construction Practice

    Please visit https://www.contractorcampus.com/timber-pile-design-construction-manual.html
    Sales price: $0.00
    Quantity:
  • Pipefitting Level Three

    Pipefitting Level Three

    Pipefitting Level Three Number of Pages: 326 pages Product Dimensions: 8-1/2 X 11" Publisher: Prentice Hall Edition: 3rd ISBN-10: 0-13-227284-9 ISBN-13: 978-0-13-227284-1
    $125.33
    $125.33
    Tabs:
    Quantity:
  • Plumbing Basics for Contractors

    Plumbing Basics for Contractors

    Plumbing Basics for Contractors. Plumbing Basics for Contractors, 3rd Edition (ISBN 978-1-269-78624-9) replaces Plumbing Basics for Contractors, 2nd Edition (ISBN 978-1-269-24887-7). Plumbing Basics for Contractors, 2nd Edition (ISBN 978-1-269-24887-7) is still approved for use, but it is not the preferred edition.
    $177.60
    $177.60
    Tabs:
    Quantity:
  • Manual J - Residential Load Calculation

    Manual J - Residential Load Calculation

    Residential Load Calculations - Manual J. Air Conditioning Contractors of America, 2800 Shirlington Road, Suit 300, Alirngton VA 22206
    $158.88
    $158.88
    Tabs:
    Quantity:
  • Setting Tile

    Setting Tile

    This book is in good condition but is used. The price listed is used-book pricing. Tile Setting is a great reference for tile contractors of all levels of expertise and for contractor preparing for their tile license exam. Number of Pages: 244, Product Dimensions: 10" x 8" x 1/2", Weight: 1.6 Lbs, Autor: Byrne, Michael, Publisher: Taunton, Edition: Revised and Updated, ISBN-10: 1561580805, ISBN-13: 9781561580804
    $8.94
    $8.43
    Tabs:
    Quantity:
  • Sheet Metal Level One

    Sheet Metal Level One

    396 pages; Publisher: Prentice Hall; 3 edition (May 12, 2008); Language: English; ISBN-10: 0136044824; ISBN-13: 978-0136044826; Product Dimensions: 8.4 x 1 x 10.7 inches; Shipping Weight: 2 pounds; This reference is described by the publisher as follows: This exceptionally produced trainee guide features a highly illustrated design, technical hints and tips from industry experts, review questions and a whole lot more! Key content includes: Introduction to the Sheet Metal Trade, Tools of the Trade, Introduction to Sheet Metal Layout and Processes, Trade Math One, Fabrication One — Parallel Line Development, Installation of Ductwork, Installation of Air Distribution Accessories, Insulation, and Architectural Sheet Metal.
    $88.00
    $88.00
    Tabs:
    Quantity:
  • Sheet Metal Level Three

    Sheet Metal Level Three

    395 pages; Publisher: Prentice Hall; 3 edition (July 27, 2009); Language: English; ISBN-10: 0136099629; ISBN-13: 978-0136099628; Product Dimensions: 8.4 x 1 x 10.9 inches; Shipping Weight: 2.3 pounds; The books is described by the publisher as follows: This exceptionally produced trainee guide features a highly illustrated design, technical hints and tips from industry experts, review questions and a whole lot more! Key content includes Trade Math Three — Field Measuring and Fitting, Air Systems, Principles of Airflow, Louvers, Dampers, and Access Doors, Comprehensive Plan and Specification Reading, Fabrication Three — Triangulation and Advanced Architectural Sheet Metal.
    $125.33
    $125.33
    Tabs:
    Quantity:
  • Sheet Metal Level Two

    Sheet Metal Level Two

    408 pages; Publisher: Prentice Hall; 3 edition (December 27, 2008); Language: English; ISBN-10: 0136044840; ISBN-13: 978-0136044840; Product Dimensions: 8.5 x 1.1 x 10.9 inches; Shipping Weight: 2.5 pounds; This exceptionally produced trainee guide features a highly illustrated design, technical hints and tips from industry experts, review questions and a whole lot more! Key content includes Trade Math Two, Plans and Specifications, Fabrication Line Two — Radial Line Development, Sheet Metal Duct Fabrication Standards, Air Properties and Distribution, Bend Allowances, Soldering, Basic Piping Practices, and Fiberglass Duct.
    $125.33
    $125.33
    Tabs:
    Quantity:
  • Solar Water and Pool Heating Design and Installation Manual: FSEC-IN-21-82

    Solar Water and Pool Heating Design and Installation Manual: FSEC-IN-21-82

    please visit https://www.contractorcampus.com/solar-thermal-manual-solar-water-and-pool-heating-manual.html
    Sales price: $0.00
    Quantity:
  • Sprinkler Fitting Level 1

    Sprinkler Fitting Level 1

    Publisher: Prentice Hall; 2nd Revised edition edition (2007); Language: English; ISBN-10: 0132286114; ISBN-13: 978-0132286114; Product Dimensions: 10.7 x 8.4 x 0.7 inches; Shipping Weight: 1.8 pounds; The publisher describes it as follows: This exceptionally produced trainee guide features a highly illustrated design, technical hints and tips from industry experts, review questions and a whole lot more! Key content includes Orientation to the Trade, Introduction to Components and Systems, Steel Pipe, CPVC Pipe and Fittings, Copper Tube Systems and Underground Pipe.
    $82.67
    $82.67
    Tabs:
    Quantity:
  • Sprinkler Fitting Level 2

    Sprinkler Fitting Level 2

    304 pages; Publisher: Prentice Hall; 3 edition (April 17, 2014); Language: English; ISBN-10: 0133802906; ISBN-13: 978-0133802900; Product Dimensions: 8.3 x 0.9 x 10.8 inches; Shipping Weight: 1.9 pounds; The publisher describes the book as follows: This exceptionally produced trainee guide features a highly illustrated design, technical hints and tips from industry experts, review questions and a whole lot more! Key content includes: Hangers, Supports, Restraints, and Guides, General Purpose Valves, General Trade Math, Shop Drawings, Standard Spray Fire Sprinklers, Wet Fire Sprinkler Systems, and Dry-Pipe Systems.
    $125.33
    $125.33
    Tabs:
    Quantity:
  • Sprinkler Fitting Level 3

    Sprinkler Fitting Level 3

    Publisher: Prentice Hall; 2nd edition (October 5, 2007); Language: English; ISBN-10: 0136144365; ISBN-13: 978-0136144366; Product Dimensions: 8.4 x 0.7 x 10.7 inches; Shipping Weight: 1.6 pounds; The Publisher describes the books as follows: This exceptionally produced trainee guide features a highly illustrated design, technical hints and tips from industry experts, review questions and a whole lot more! Key content includes Deluge/Preaction Systems, Standpipes, Water Supplies, Fire Pumps and Application-Specific Sprinklers and Nozzles
    $120.00
    $120.00
    Tabs:
    Quantity:
  • Standard Specifications for Road and Bridge Construction

    Standard Specifications for Road and Bridge Construction

    The Standard Specifications for Road and Bridge Construction is published by The Florida Department of Transportation and is the go-to standard for this type of civil construction.
    $228.00
    $228.00
    Tabs:
    Quantity:
  • Study Guide for Commercial Carpentry

    Study Guide for Commercial Carpentry

    Study Guide for Commercial Carpentry, 2nd Edition , 2014. ISBN: 978-1-269-78661-4. Pearson, 501 Boylston Street, Suite 900, Boston, MA 02116. Available at www.provbookstore.com
    $166.14
    $166.14
    Tabs:
    Quantity:
  • Study Guide for Excavation Contractors

    Study Guide for Excavation Contractors

    Edition: 2th ISBN-13: 978-1-269-78572-3 Category: ProV Study Guide for Excavation Contractors, 2nd edition , 2014. ISBN: 978-1-269-78572-3. Pearson, 501 Boylston Street, Suite 900, Boston, MA 02116. Available at www.provbookstore.com
    $141.60
    $141.60
    Tabs:
    Quantity:
  • Study Guide for General Engineering

    Study Guide for General Engineering

    Study Guide for General Engineering, 3rd edition , 2014. ISBN: 978-1-269-78657-7. Pearson, 501 Boylston Street, Suite 900, Boston, MA 02116. Available at www.provbookstore.com
    $178.74
    $178.74
    Tabs:
    Quantity:
  • Study Guide for Insulation

    Study Guide for Insulation

    ISBN: 978-0-136-06315-5 Prov. Study Guide for Insulation. ProvBookStore.com
    $86.50
    $86.50
    Tabs:
    Quantity:
  • Study Guide for Masonry Contractors

    Study Guide for Masonry Contractors

    Study Guide for Masonry Contractors 978-1-269-78558-7 Prov
    $150.00
    $150.00
    Tabs:
    Quantity:
  • Study Guide for Pipefitters

    Study Guide for Pipefitters

    Study Guide for Pipefitters ISBN-10: 978-1-269-26208-8
    $285.00
    $285.00
    Tabs:
    Quantity:
  • Study Guide for Residential Carpentry and Repair

    Study Guide for Residential Carpentry and Repair

    Study Guide for Residential Carpentry & Repair, 2nd edition , 2014. ISBN: 978-1-269-78561-7. Pearson, 501 Boylston Street, Suite 900, Boston, MA 02116. Available at www.provbookstore.com
    $153.52
    $153.52
    Tabs:
    Quantity:
  • Study Guide For Room Air Conditioning

    Study Guide For Room Air Conditioning

    The Study Guide for Room Air Conditioning is a great Prov reference covering the key basic subject of Room Air Conditioning through this study guide
    $151.00
    $151.00
    Tabs:
    Quantity:
  • $103.58
    $103.58
    Tabs:
    Quantity:
  • Study Guide for Utilities Contractors

    Study Guide for Utilities Contractors

    Study Guide for Utilities Contractors. This new 2015 reference replaces Study Guide for Utilities Contractors (978-1-256-26130-8), Heavy Equipment Operations Level 1 Trainee Guide, Heavy Equipment Operations Level 2 Trainee Guide, Heavy/Highway Construction Trainee Guide, Pipefitting Level 2 Trainee Guide, and Pipelayer Level 1 Trainee Guide. Study Guide for Utilities Contractors (978-1-256-26130-8) is approved for use, but it is not the preferred edition.
    $97.07
    $97.07
    Tabs:
    Quantity:
  • TCNA Handbook for Ceramic, Glass, and Stone Tile Installation

    TCNA Handbook for Ceramic, Glass, and Stone Tile Installation

    The TCNA handbook is a guide to assist in clarifying and standardizing installation specifications for tile. Each installation recommendation, or method, requires a properly designed, constructed, and prepared substructure using materials and construction techniques that meet nationally recognized material and construction standards. Included are: product selection guides for ceramic, glass, and stone tiles; guidelines for wet areas; ISO mortar and grout specifications; information on substrate flatness requirements; information on grout joint sizes and patterns, and workmanship standards excerpted from ANSI installation standards
    $61.60
    $61.60
    Tabs:
    Quantity:
  • Terrazzo Specification and Design Guide

    Terrazzo Specification and Design Guide

    Terrazzo Specification and Design Guide is a wonderful publication on terrazzo specifications and design. It serves as a reference to installers and contractors alike. It is also an important reference commonly used for terrazzo contractor licensing exams. Number of Pages: 69 Product Dimensions: 11 x 8 9/16 x 5/16 Weight: 0.4 Lbs
    $11.04
    $11.04
    Tabs:
    Quantity:
  • Dock Manual, Design, Building, Maintaining

    Dock Manual, Design, Building, Maintaining

    Dock Manual, Design, Building, Maintaining is a complete dock manual which can be used as a guide to make repairs, upgrades, and winterize docks and ramps. It also covers aspects of painting, staining, and treatment of wood and plastic.
    $27.57
    $27.57
    Tabs:
    Quantity:
  • Tile Your World

    Tile Your World

    Tile Your World Number of Pages: 272 Autor: John P. Bridge Edition: 2003 ISBN-10: 0-9742754-3-3 ISBN-13: 978-0-9742754-3-7
    $65.00
    $65.00
    Tabs:
    Quantity:
  • To Fell a Tree

    To Fell a Tree

    To Fell a Tree. 978-0-615-33879-8. Tree Care Industry Association.
    $28.06
    $28.06
    Tabs:
    Quantity:
  • Turf Irrigation Manual

    Turf Irrigation Manual

    Turf Irrigation Manual: The Complete Guide to Turf and Landscape Irrigation Systems. 396 pages; Publisher: Telsco Industries; 5 edition (May 1994); Language: English; ISBN-10: 0963509608; ISBN-13: 978-0963509604; Product Dimensions: 1 x 9 x 11.5 inches; Shipping Weight: 3.4 pounds
    $58.63
    $58.63
    Tabs:
    Quantity:
  • Understanding and Servicing Alarm Systems

    Understanding and Servicing Alarm Systems

    Understanding and Servicing Alarm Systems provides information on micro-computerized controls, sophisticated detection devices, and methods of alarm reporting. Great book for electrical contractors preparing for their electrical contractor exams. Product Dimensions: 0.8 x 6.2 x 9.5 inches, Number of Pages: 272 pages, Weight: 1 pound,Author: H. William Trimmer B.S., Publisher: Butterworth-Heinemann, Edition: 3rd Edition, ISBN-10: 0750672064, ISBN-13: 978-0750672061
    $92.20
    $92.20
    Tabs:
    Quantity: