Saturday, July 20, 2019

Contractor Campus

Books & Classes for your Contractor's License

Broward County (Florida) Mechanical Contractor (GITS) License

Mechanical contractor means a contractor whose services are unlimited in the execution of contracts requiring the experience, knowledge, and skill to install, maintain, repair, fabricate, alter, extend, or design, when not prohibited by law, central air conditioning, refrigeration, heating, and ventilating systems, including duct work in connection with a complete system, only to the extent such duct work is performed by the contractor as is necessary to make complete an air-distribution system, boiler, and unfired pressure vessel systems, lift station equipment, and piping, and all appurtenances, apparatus, or equipment used in connection therewith, and any duct cleaning and equipment sanitizing, therewith; to install, maintain, repair, fabricate, alter, extend, or design, when not prohibited by law, piping, insulation of pipes, vessels and ducts, pressure and process piping, pneumatic control piping, gasoline tanks and pump installations and piping for same, standpipes, air piping, vacuum line piping, oxygen lines, nitrous oxide piping, ink and chemical lines, fuel transmission lines, gaseous and liquefied hydrogen systems, liquefied petroleum gas lines within buildings, and natural gas fuel lines within buildings; to disconnect or reconnect power wiring on the load side of the disconnect switch and low-voltage heating, ventilating, and air conditioning control wiring; and to install a condensate drain from an air conditioning unit to an existing safe waste or other approved disposal other than a direct connection to a sanitary system. The scope of work for such contractor shall also include any excavation work incidental thereto, but shall not include any work such as potable water lines or connections thereto, sanitary sewer lines, swimming pool piping and filters, or electrical power wiring.

Mechanical Contractor Exams

Mechanical Exam

  • Exam MAE1B
  • Testing Method: Open book
  • Testing Company: GITS (Gainesville Independent Testing Service)
  • Hours Alloted: 4h
  • Passing Score: 70%
  • Types of Questions: Multiple Choice.
  • Number of questions: 100
  • Subjects Involved:
    • Code Compliance
    • Fuel Gas
    • Ductwork - Systems and Sizing
    • Load Calculations
    • Boilers
    • General
    • Maintenance and Service
    • Controls
    • Piping
    • Insulation
    • Psychometrics
    • Broward Chapter 9
    • Safety

Business Procedures Exam

  • Exam AAE2B
  • Testing Method: Open Book
  • Testing Company: GITS (Gainesville Independent Testing Service)
  • Hours Alloted: 2h
  • Passing Score: 70%
  • Types of Questions: Multiple Choice.
  • Number of questions: 50
  • Subjects Involved:
    • Insurance Laws
    • Tax Laws
    • Safety
    • Management
    • Lien Laws
    • Employment Laws
    • General Accounting
    • Chapter 9

Courses For Mechanical Contractor License

  • Broward County (Florida) Mechanical Contractor (GITS) Course

    Course Description: Upon enrollment the student receives an email containing his/her ID and Password combination to access the eCampus. The student can access the eCampus 24/7 for as long as it is necessary until he/she passes all licensing exams. The eCampus contains VIDEOS, PRACTICE QUESTIONS (similar to those seen on the actual exams), typical MATH PROBLEMS with step-by-step solutions, and detailed instructions on how to FIND ANSWERS within the books. The student also has access to optional in-person classroom-style refresher seminars. The training can be completed fully online, but if the student prefers, he/she can go to any number of REFRESHER SEMINARS (no extra charges or limitations).
    $425.00
    $425.00
  • Broward County (Florida) Business Procedures (GITS) Course

    Course Description: Upon enrollment the student receives an email containing his/her ID and Password combination to access the eCampus. The student can access the eCampus 24/7 for as long as it is necessary until he/she passes all licensing exams. The eCampus contains VIDEOS, PRACTICE QUESTIONS (similar to those seen on the actual exams), typical MATH PROBLEMS with step-by-step solutions, and detailed instructions on how to FIND ANSWERS within the books. The student also has access to optional in-person classroom-style refresher seminars. The training can be completed fully online, but if the student prefers, he/she can go to any number of REFRESHER SEMINARS (no extra charges or limitations).
    $240.00
    $240.00

Full Bookset For Mechanical

The books set includes all required references for both the Mechanical and Business Procedures exams. Orders placed before 2 PM are shipped the same day via UPS and a tracking number is emailed before 3 PM.

BROWARD COUNTY (FLORIDA) MECHANICAL (GITS) BOOK SET WITHOUT TABS INCLUDES
BOOKS FOR TRADE AND BUSINESS - ALL BOOKS LISTED BELOW

Sales price: $830.13

BROWARD COUNTY (FLORIDA) MECHANICAL (GITS) BOOK SET WITH TABS INCLUDES
BOOKS FOR TRADE AND BUSINESS - ALL BOOKS LISTED BELOW

Sales price: $930.13

Mechanical Books

OSHA is required for both the business and the trade exams.

  • Florida Building Code - Mechanical

    Florida Building Code - Mechanical

    The Florida Mechanical Code is currently on its 2017 edition and is the most widely used reference for Mechanical-installations compliance in the State.
    $88.00
    $88.00
    Tabs:
    Quantity:
  • Florida Building Code Ch 13 Energy Efficiency

    Florida Building Code Ch 13 Energy Efficiency

    Out of Print. This book used to be Chapter 13 within the 2007 version of the Florida Building Code (building volume). When the 2010 edition of the Florida Building Code came out, chapter 13 was removed from the Florida Building Code (building volume) and a separate code was created. What used to be Chapter 13 is now known as The Florida Building Code-Energy Conservation. Although this reference is still listed by GITS as one of the references used for some tests, it is NOT used during the test. This reference is no longer printed by the publisher. Please DISREGARD this particular book/item. It is no longer used for testing.
    Sales price: $0.00
    Tabs:
    Quantity:
  • Florida Building Code - Fuel Gas

    Florida Building Code - Fuel Gas

    The Fuel Gas Code currently used for state contractor testing in Florida is the 6th edition (2017) . This reference is used during mechanical and plumbing tests.
    $88.00
    $88.00
    Tabs:
    Quantity:
  • Modern Refrigeration and Air Conditioning

    Modern Refrigeration and Air Conditioning

    Modern Refrigeration and Air Conditioning is an important book in the AC trade, it is the sort of book you want to keep within reach when troubleshooting systems.
    $86.15
    $86.15
    Tabs:
    Quantity:
  • Trane Ductulator

    Trane Ductulator

    The Trane Ductulator is a tool used for duct sizing. It provides the user with the dimensions for both rectangular and circular ducts as long a required air flow and air velocity are given.
    $12.25
    $12.25
    Quantity:
  • HVAC Duct Construction Standards – Metal and Flexible

    HVAC Duct Construction Standards – Metal and Flexible

    The HVAC Duct Construction Standards is a SMACNA publication which deals with all aspects of metal and flexible duct construction.
    $177.78
    $177.78
    Tabs:
    Quantity:
  • CFR (OSHA) Tile 29 Part 1926

    CFR (OSHA) Tile 29 Part 1926

    OSHA (CFR 29 Part 1926) is the leading safety reference in the construction industry covering all aspects of construction.
    $36.04
    $36.04
    Tabs:
    Quantity:
  • Broward County Code, Chapter 9 - Contractors

    Broward County Code, Chapter 9 - Contractors

    The purpose of this reference (Broward Ch 9) is to provide a uniform central system for the examination, certification, and regulation of all individuals or business organizations who are engaged in, or who intend or desire to engage in, the trades and occupations of: (1)Plumbing and specialty plumbing contractors; (2)Electrical and specialty electrical contractors; (3)General and specialty building contractors; (4)Mechanical and specialty mechanical contractors; (5)Liquefied petroleum gas contractors; and (6)Engineering and specialty engineering contractors. This reference must be used by all contractors trying to get a Broward County Contractor license during their contractor exams. It is highly recommended that contractors carefully study this particular reference during their exam prep process. Number of Pages: 128 Product Dimensions: 11" x 8.5" x 1/4" Weight: 0.8 Lbs
    $22.88
    $22.88
    Tabs:
    Quantity:
  • Architectural Sheet Metal Manual

    Architectural Sheet Metal Manual

    Architectural Sheet Metal Manual is the go-to reference for contractors in the mechanical and sheet metal trades.
    $249.60
    $249.60
    Tabs:
    Quantity:

Business Procedures Books

OSHA is required for both the business and the trade exams.

  • Florida Contractor's Business Procedures Reference Manual

    Florida Contractor's Business Procedures Reference Manual

    This book includes many of the aspects of operating a business related to the construction industry and shows everything there is to know about the proper way to file taxes; what insurance to carry; how to manage daily accounts, and how, when, and why to file a paperwork for a lien.
    $69.43
    $69.43
    Tabs:
    Quantity:
  • Broward County Code, Chapter 9 - Contractors

    Broward County Code, Chapter 9 - Contractors

    The purpose of this reference (Broward Ch 9) is to provide a uniform central system for the examination, certification, and regulation of all individuals or business organizations who are engaged in, or who intend or desire to engage in, the trades and occupations of: (1)Plumbing and specialty plumbing contractors; (2)Electrical and specialty electrical contractors; (3)General and specialty building contractors; (4)Mechanical and specialty mechanical contractors; (5)Liquefied petroleum gas contractors; and (6)Engineering and specialty engineering contractors. This reference must be used by all contractors trying to get a Broward County Contractor license during their contractor exams. It is highly recommended that contractors carefully study this particular reference during their exam prep process. Number of Pages: 128 Product Dimensions: 11" x 8.5" x 1/4" Weight: 0.8 Lbs
    $22.88
    $22.88
    Tabs:
    Quantity:
  • CFR (OSHA) Tile 29 Part 1926

    CFR (OSHA) Tile 29 Part 1926

    OSHA (CFR 29 Part 1926) is the leading safety reference in the construction industry covering all aspects of construction.
    $36.04
    $36.04
    Tabs:
    Quantity: